Siemens SINUMERIK 840D sl Commissioning Manual page 644

Fundamentals
3.4 Troubleshooting (log book)
Example
HS1 = ("new softkey menu")
HS2=("no function")
PRESS(HS1)
LS("Menu1")
END_PRESS
PRESS (HS2)
END_PRESS
Various configurations of the start softkeys
Various configurations of the start softkeys are merged. In this case, initially the name of the
file to be interpreted is read-out of easyscreen.ini. A search is made for files with the .com
extension in the following directories:
●
● /oem/sinumerik/hmi/proj/
●
● /siemens/sinumerik/hmi/proj/
The configurations included for the start softkeys are now merged to form a configuration,
i.e. the individual softkeys are compared. If there are two or more configurations for a
softkey, the higher order is always transferred into the merge version.
Softkey menus or dialogs that are possibly included are ignored. If a softkey has a command
without file information e.g.
in the same file, then the corresponding file name is supplemented in the internal merge
version so that in this case, no changes are required. The merge configuration contained is
then subsequently displayed.
3.4 Troubleshooting (log book)
Overview
If "Run MyScreens" detects errors when interpreting the configuration files, these errors will
be written to the easyscreen_log.txt ASCII file. The file will be deleted each time the user
interface is restarted.
The file indicates:
● The action during which an error occurred
● The line and column number of the first faulty character
● The entire faulty line of the configuration file
26
/user/sinumerik/hmi/proj/
/addon/sinumerik/hmi/proj/
; load new softkey bar
; empty PRESS method
, as the required softkey menu or dialog is contained
LM ("test")
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Integrate Run MyScreens (BE2)