Siemens SINUMERIK 840D sl Commissioning Manual page 1050

Installing and configuring updates and automation software
4.6 Installing STEP 7
Procedure
1. To start the installation assistant of STEP 7, on the product DVD in directory "
double-click
2. Confirm the preselected directory under
installation directory.
3. In step "Transfer license keys," select "No, transfer license keys later."
Note
Licensing of STEP 7 with SINUMERIK Add-on
The licensing for STEP 7 is performed during installation of the SINUMERIK Add-on.
4. After you have installed STEP 7, restart the PCU and switch to the Service Desktop.
5. To start the installation wizard of the SINUMERIK Add-on, double-click
product DVD in directory "
6. After you have installed the SINUMERIK Add-on, restart the PCU.
Result
STEP 7 has been installed with SINUMERIK Add-on.
The software has been registered in the Control Panel under the following designations:
● STEP7 V5.5 SP3
● SINUMERIK Add-on for STEP7 V5.5
48
.
setup.exe
The installation wizard guides you through the following steps.
C:\Program Files (x86)\Siemens\Step7\
."
Sinumerik_Add_On
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
,"
CD_1
as the
on the
setup.exe
PCU Base Software (IM10)