Procedure
Additional nodes
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
1.
The "Network Status" window opens.
2.
Press the "Accessible nodes" softkey.
The "Accessible Nodes" window opens.
The IP address, HW-Id/type and location are displayed in tabular form
for each node.
3.
Press the "Sort" softkey.
4.
Press the "By name", "By IP", "By type" or "By location" softkeys to sort
the display.
- OR -
If further information is provided for a selected node, press the "Details"
softkey to open the Web user interface.
Note: The installed operating software must be located in the same
network as the device to be displayed. If necessary, this is achieved by
the assignment of a second IP address (alias).
The "Details" window opens.
Press the "Zoom +" or "Zoom -" softkey until the desired display size is
reached.
3.
Press the "Additional nodes" softkey to search for nodes that are not
listed under "Accessible nodes".
The "Search for Additional Nodes" window opens. If necessary, change
the address range and confirm with "OK".
The found nodes are appended in the table; the HW-Id/type, Location,
Contact and Description fields can then be edited and, by activating the
checkbox, added to the first column, and, with a subsequent save,
added to the reference topology.
Service and diagnostics
18.11 Station-related network diagnostics
369