Siemens SINUMERIK 840D sl Commissioning Manual page 391

Editing variables of a trace session
Function
Ctrl + X
or right-click, shortcut menu "Cut"
Ctrl + C
or right-click, shortcut menu
"Copy"
Ctrl + V
or right-click, shortcut menu
"Paste"
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
3. Press the "Insert variable" softkey.
The "Select Variable" window opens.
Note:
When selecting a "Drive parameter", firstly select the drive object (DO)
and then insert the desired parameter from the list of corresponding
parameters.
4. Press the "Filter/search" softkey to start a specific search.
In the "Filter" selection box, select a variable area.
- OR -
Directly enter the variable into the "Search" entry field.
The cursor jumps to the term that is found.
Press the "Delete search" softkey if you wish to terminate the search.
5. Press the "Add" softkey to enter the required variable into a trace
session.
The "Variable Attributes" window opens and you can select the
appropriate value (e.g. channel data, drive bus no.) from a combobox.
- OR -
Press the "Replace" softkey to replace an already selected version by
another one.
6. Press the "OK" softkey to add or replace the variable.
Each variable is automatically allocated a reference number, which is
displayed in the upper section of the window. This number is opened
automatically allocated. If a version is removed, then the following
variables are re-numbered.
7. Now, select the desired settings for display, such as color, pen, qty.
event etc.
Meaning
Press the key combination or open the shortcut menu in order to
cut out a variable.
Press the key combination or open the shortcut menu in order to
copy a variable.
Press the key combination or open the shortcut menu in order to
insert a variable.
Service and diagnostics
18.14 Trace
385