Siemens SINUMERIK 840D sl Commissioning Manual page 938

Configuring the system
2.1 System settings
Proceed as follows
To add the PCU to a domain:
1. Select: "Start" → "Settings" → "Control Panel" → "System", "Computer Name" tab.
2. Click "Change ...".
3. Enter the name of the domain to which you want to add the PCU.
4. You will then be asked to log on as a user with the corresponding entitlement to conclude
2.1.4 How to connect an external monitor
Preconditions
To connect an external monitor, the following preconditions apply:
● The external monitor is connected to the DVI interface on the PCU (using an adapter, if
● The monitor may not be connected while in use.
44
Default: The PCU belongs to a "WORKGROUP" and is not assigned to any domain.
The following dialog opens:
Figure 2-2 Add PCU to domain
the process.
necessary).
Commissioning Manual, 02/2012, 6FC5397-1DP40-3BA0
PCU-Basesoftware (IM8)