Siemens SINUMERIK 840D sl Commissioning Manual page 739

Normally, the resulting code cannot be recompiled. The following steps are required in order
to be able to recompile the cycle calls generated in this way:
● Expanding the easyscreen.ini
● Creating an ini file for a cycle description
Mname
Dname
OUTPUT
Anzp
Version
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
Section
[RECOMPILE_INFO_FILES]
section, all ini files are listed that contain descriptions for cycles recompiled without
comment:
[RECOMPILE_INFO_FILES]
IniFile01 = cycles1.ini
IniFile02 = cycles2.ini
Several ini files can be specified, whose names can be freely selected.
The ini file with the cycle descriptions is stored under /user or /oem in the directory
/sinumerik/hmi/cfg. A separate section is required for each cycle. The section name
corresponds to the name of the cycle:
[Cycle123]
Mname = TestGC
Dname = testgc.com
OUTPUT = Code1
Anzp = 3
Version = 0
Code_type = 1
Icon = cycle123.png
Desc_Text = This is describing text
will be introduced into the easyscreen.ini file. In this
Screen form name
Name of the file in which the screen is defined
Name of the respective output block
Number of parameters of the screen to be recompiled (all with
DEF-created variables, also help variables)
(optional) version specification for cycle
Programming commands
6.3 Functions
121