Siemens SINUMERIK 840D sl Commissioning Manual page 648

Dialogs
4.1 Structure and elements of a dialog
Figure 4-1
Overview
The definition of a dialog (definition block) is basically structured as follows:
Definition block
//M...
DEF Var1=...
...
HS1=(...)
...
PRESS(HS1)
LM...
END_PRESS
//END
Within the dialog definition block, various variables that appear as dialog elements in the
dialog, as well as horizontal and vertical softkeys, are defined first. Different types of actions
are then configured in methods.
30
①
Machine status display ("header")
②
Dialog element
③
8 vertical softkeys
④
8 horizontal softkeys
⑤
Output of diagnostic messages
⑥
Graphic
⑦
Dialog
⑧
Header line of the dialog with header and long text
Structure of the dialog
Comment
;Dialog start identifier
;Variables
;Softkeys
;Method start identifier
;Actions
;Method end identifier
;Dialog end identifier
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
Chapter reference
See chapter "Variables"
See chapter "Softkey menus"
See chapter "Methods"
SINUMERIK Integrate Run MyScreens (BE2)