Siemens SINUMERIK 840D sl Commissioning Manual page 1079

Procedure
To configure the network settings of the PG/PC for connecting a PCU in the system network,
proceed as follows:
1. Open the "network connections" window:
2. Right-click on the network adapter you want to configure, then choose "Properties" from
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
– To do this under Windows XP: in the "Start > Control Panel > Network and Internet
Connections" menu, choose "Network Connections."
– To do this under Windows 7: in the Control Panel in category "Network and Internet >
View network status and tasks," choose "Change adapter settings."
the shortcut menu.
This opens the "Properties of <connection>" dialog box.
Figure 5-11 Properties of <connection>
Backing up and restoring data
5.10 Operating a service PC/PC in the network
77