Siemens SINUMERIK 840D sl Commissioning Manual page 496

Configuring cycles
22.5 Turning
MD24436 $MC_TRAFO_INCLUDES_TOOL_5
= 0
MD24700 $MC_TRAANG_ANGLE_1
= 55
Data record for linking (TRACON) of end face machining on main spindle (TRANSMIT) and
inclined axis (TRAANG):
MD24440 $MC_TRAFO_TYPE_6
= 8192
MD24444 $MC_TRAFO_GEOAX_ASSIGN_TAB_6[ ]
[0] = 1
[1] = 3
[2] = 2
MD24995 $MC_TRACON_CHAIN_1[ ]
[0] = 1
[1] = 5
490
Tool handling with active transformation 5.
Angle between 1st and 2nd transformer axis. Data record for linking (TRACON) of end
face machining on main spindle (TRANSMIT) and inclined axis (TRAANG).
Type of transformation that is available as sixth in the channel.
1. axis = channel axis, XC
2. axis = channel axis, YC
3. axis = channel axis, ZC
Number of the TRANSMIT transformation (main spindle) for linking.
Number of the TRAANG transformation for linking. Data set for linking (TRACON) of
cylinder surface transformation on main spindle (TRACYL) and inclined axis (TRAANG).
Assignment of geometry axes to channel
axes for transformation 6.
Transformation linking
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)