Siemens SINUMERIK 840D sl Commissioning Manual page 629

Navigation
The first dialog is called using the "START" softkey in the machine operating area in the
AUTO mode. The horizontal SK6 softkey is used.
Figure 2-4
Using the "NEXT" softkey you can call the second dialog from the first dialog, and using the
"EXIT" softkey, you can return to the root screen of the operating area (see diagram above).
Using the "EXIT" softkey, you can return to the root screen of the operating area from the
second dialog (see the diagram above).
Procedure
The necessary steps are described in the following chapters:
1. Creating the configuration file (COM file)
2. Saving the configuration file in the OEM directory
3. Creating the online help
4. Saving the online help in the OEM directory
5. Copying easyscreen.ini into the OEM directory
6. Registering the COM file in easyscreen.ini
7. Testing the project
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
Start softkey „START" in the machine operating area, AUTO mode
Getting Started
2.2 Example
11