Siemens SINUMERIK 840D sl Commissioning Manual page 782

Reference lists
A.1 Lists of start softkeys
Turning
The following tables list the possible start softkeys for turning technology. Assignments of
individual start softkeys can differ depending on the particular system. The specified OEM
softkeys are permitted for "Run MyScreens".
programGUIDE (G-Code) start softkeys:
Drilling
HSK2
VSK1 Centering
VSK2 Drilling
reaming
VSK3 Deep-hole
drilling
VSK4 Boring
VSK5 Thread
VSK6 OEM
VSK7 Positions
VSK8 Repeat
position.
164
Turning Contour turning
HSK3 HSK4
Stock Contour
removal
Groove Stock removal --
Undercut Stock removal
residual
material
Thread Grooving
Parting Grooving
residual
material
-- Plunge-
turning
OEM Plunge
turning
residual
material
-- >>
Milling
HSK5
-- Face Contour
milling
Pocket Path
-- Multi-edge Predrilling
spigot
-- Groove Pocket
-- Thread Pocket
milling res. mat.
-- Engraving Spigot
OEM OEM Spigot res.
mat.
<< Contour <<
milling
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1
Miscellaneous
HSK6
Settings High
speed
settings
Swivel plane Parallel
axes
Swivel tool --
-- --
-- --
Subprogram --
-- OEM
>> <<