Siemens SINUMERIK 840D sl Commissioning Manual page 487

Lathe with X and Z axes, main and tool spindle
For example, for a lathe with X and Z axes, main spindle (C1) and tool spindle (WZ), you can
configure the following channel-specific machine data:
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C1
[3] = WZ
Lathe with X and Z axes, main and tool spindle and counterspindle
For example, for a lathe with X and Z axes, main spindle (C1), tool spindle (WZ) and
counterspindle (C2), you can configure the following machine data:
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C1
[3] = WZ
[5] = C2
Lathe with X and Z axes, main and tool spindle and Y axis
For example, for a lathe with X, Z and Y axes, main spindle (C1) and tool spindle (WZ), you
can configure the following machine data:
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[ ]
[0] = XC
[1] = ZC
[2] = C1
[3] = WZ
[5] = YC
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Channel axis XC
Channel axis ZC
Main spindle C1
Tool spindle WZ
Channel axis XC
Channel axis ZC
Main spindle C1
Tool spindle WZ
Counterspindle C2
Channel axis XC
Channel axis ZC
Main spindle C1
Tool spindle WZ
Channel axis YC
Configuring cycles
22.5 Turning
Channel axis name in the channel
Channel axis name in the channel
Channel axis name in the channel
481