Siemens SINUMERIK 840D sl Commissioning Manual page 187

1. Creating tools for the code carrier:
2. Unloading tools on the code carrier:
3. Deleting the tool on the code carrier:
The following settings can be made:
Entries
Enabled
ShowInternalMessage
UnloadWithDelete
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Figure 12-1 New tool for the code carrier
The data for the code carrier tool is read and displayed in the "New Tool" window. Click
OK to create the tool in the NC and to initialize it with the code carrier data.
The tool is unloaded and the data of the tool is written to the code carrier. The tool can
also be deleted using a setting (see below).
The tool is unloaded and the data of the tool is written to the code carrier. The tool is then
deleted from the NC. Using a setting (see below), the "On code carrier" softkey can also
be hidden for deleting a tool.
Meaning
true - code carrier connection is offered.
false - code carrier connection is not offered.
true - internal messages for error analysis are also displayed.
false - default setting, no internal messages are displayed.
true - the tool is deleted when unloaded to the code carrier. The "On
code carrier" function is not offered for "Delete tool".
false - default setting, the tool is only unloaded for "unload to code
carrier" and remains in the NC memory.
Tool management
12.2 Configuring the user interface
181