Siemens SINUMERIK 840D sl Commissioning Manual page 1055

Reference
The following section contains an overview of all setting options of the
The priority concept is the same as that of the other configuration files, see Directory
structure and file conventions (Page 11).
You can also deactivate settings in
priority configuration file. For example, to deactivate
priority, enter
Table 4- 2 Setting options in the configuration file of the PCU Installer
Section
[local_setupdirs]
[removable_setupdirs]
[net_setupdirs]
[setupdirs_settings]
[setupdirs_settings]
[setupnames]
[noactivation]
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Installing and configuring updates and automation software
in the file with higher priority.
DIR002=
Settings
DIR001=
DIR002=
...
DIR001=
DIR002=
...
DIR001=
DIR002=
...
deleteTmpLocalSetupDirs=
keepDInstallSubdirsWithPrefix=
NAME001=
NAME002=
...
APP001=
APP002=
by deleting the value of the key in the higher
PCUInst.ini
DIR002=C:\Setup
Description
Specifies the local setup directories on the PCU 50.5 to be
checked.
You can specify multiple directories, which are then checked in
the order you defined.
You define the order with a number after "DIR."
Subdirectories at the first level are also scanned.
Specifies the setup directories on removable data media to be
checked.
You can specify multiple directories, which are then checked in
the order you defined.
You define the order with a number after "DIR."
Subdirectories at the first level are also scanned.
Specifies the setup directories on network drives to be checked.
See also: Creating a shortcut to the network drive (Page 83)
You can specify multiple directories, which are then checked in
the order you defined.
You define the order with a number after "DIR."
Subdirectories at the first level are also scanned.
Temporary directories are created during installation of a setup
from the main directory D:\Install.
Here you can specify whether they are to be deleted again after
installation.
Possible values: yes; no
You can specify that subdirectories of D:\Install with a
particular prefix in the directory name are not to be deleted after
setup is completed.
Specifies which files are setup packages and are to be included
in the check of setup directories.
You can specify entire file names with their file extensions or
represent individual parts of them with wildcard character *.
Specifies which applications of the PCU Installer are inactive
during operation.
This setting is required to prevent operation of the HMI software
or another application from being interrupted during execution of
a setup.
4.8 PCU Installer
.
PCUInst.ini
in a file of lower
53