Siemens SINUMERIK 840D sl Commissioning Manual page 141

Entries
SortationInFirstEtcLevel
ToolBufferOnceOnTop
UnloadToolFromLoadPlaceEnabled
AutoHNumberDisplayEnabled
AutoUniqueDNumberDisplayEnabled
AccessLevelDeleteAllDNos
MagazineNumberOfDCheckAndActivate
AutoFixedPlaceDisplayEnabled
MagPlaceAdapterDisplayEnabled
AdaptTransDataViewEnabled
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
12.2 Configuring the user interface
Meaning
True - the "Sorting" function is placed at the first softkey
level. The "Continue" function is omitted.
False - default setting, sorting at all softkey levels.
True - default setting, buffer is displayed at the start of
the list.
False - buffer is displayed for each magazine. Only
those locations are displayed that are assigned to the
magazine.
True - a tool at the load position can be removed from
the load position using the "Unload" softkey.
False - default setting. The "Unload" softkey is not
displayed for a tool at the load position.
Column of the cutting parameter "IsoHNoDPH - ISO H
number" depending on the machine configuration.
True - default setting, the column is automatically
displayed.
False - the column is not automatically displayed.
Column of the cutting edge parameter "UniqueDNo"
depending on the machine configuration.
True - default setting, the column is automatically
displayed.
False - the column is not automatically displayed.
The following entry specifies the access level as of
which the "Delete all D numbers delete" function is
offered.
Default setting: Access level 3 (user) - relevant only
when the "Unique D number" setting has been made.
Magazine number to which the D check (check for
unique D number) and Activate (activation of a wear
group) are to be applied.
Default setting: -2
Significance: All magazines that are connected to a
toolholder or a spindle.
Column of the tool parameter "ToolStateFixed" - tool
status - tool is fixed-location coded and acts dependent
on the magazine configuration.
True - default setting, the column is automatically
hidden, if all of the configured magazines are fixed
location coded.
False - the column is not automatically hidden.
Columns of the magazine location adapter parameters
are displayed in the "Magazine" window.
False - default setting, parameters are not displayed.
The magazine location adapter transformed display of
the cutting edge parameters is enabled. It can be
switched on and off in the settings dialog of the tool lists.
False - default setting, the magazine location adapter
transformed display of the cutting edge parameters is
not enabled.
Tool management
135