Siemens SINUMERIK 840D sl Commissioning Manual page 662

Dialogs
4.2 Defining softkey menus
4.2.1 Changing softkey properties during runtime
Description
The softkey properties Text, Access Level and Status can be changed in the methods during
runtime.
Programming
Syntax:
Description:
Parameters:
Example
Figure 4-6
44
SK.st = "Text"
SK.ac = Access level
SK.se = Status
Assign properties
Text
Access level
Status
Example 3: Graphics and softkeys
;Softkey with label
;Softkey with security level
; Softkey with status
Label text in inverted commas
Range of values: 0 ... 7
1: visible and operator-controllable
2: disabled (gray text)
3: displayed (last softkey used)
SINUMERIK Integrate Run MyScreens (BE2)
Programming Manual, 03/2013, 6FC5397-1DP40-3BA1