Siemens SINUMERIK 840D sl Commissioning Manual page 138

Tool management
12.2 Configuring the user interface
Requirement for grinding technology
Set the "Universal" technology and set:
MD52270 $MN_TM_FUNCTION_MASK bit 5 = 1.
Only the grinding tool types can be then selected on the user interface.
Procedure
1. Open the directory: /siemens/sinumerik/hmi/template/cfg
2. Copy the "oem_sltmlistconfig.xml" template file
Note
Other template for the grinding technology
The "sltmaddgrindinglistconfig.xml" template is used to expand a turning configuration by
adding grinding tools. Copy the file from the directory:
/siemens/sinumerik/hmi/template/cfg
3. Copy the file to the directory /oem/sinumerik/hmi/cfg
OR: /user/sinumerik/hmi/cfg
4. Change the file name according to the set technology:
5. Remove the comments of the example in the template to create your specific
configuration.
132
File name
sltmlistconfig.xml
sltmturninglistconfig.xml
sltmplclistconfig.xml
sltmgrindinglistconfig.xml
Technology
Milling technology
Turning technology
PLC tool management "TRANSLINE 2000"
Grinding technology
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)