Siemens SINUMERIK 840D sl Commissioning Manual page 882

Service and diagnostics
3.6 System diagnostics
3.6.2 This is how you change the system settings
Modify NCU Settings
You can change the following system settings in this menu:
Figure 3-17
Menu item
Change network settings
Disable internal HMI (currently enabled)
Reset HMI data to factory defaults
Reset NC data to factory defaults
Reset PLC data to factory defaults
Reset DRIVE data to factory defaults
86
Changing system settings
Description
Changing network settings of the NCU.
Activating/deactivating an HMI task
Restoring the delivery condition of HMI data.
Restoring the delivery condition of NC data.
Restoring the delivery condition of PLC data.
Restoring the delivery condition of drive data.
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
NCU operating system (IM7)