Backing Up And Restoring Data; Overview; Starting The Service Center - Siemens SINUMERIK 840D sl Commissioning Manual

Backing up and restoring data

5.1

Overview

You can perform maintenance work on the PCU in theService Center, which is based on
Microsoft Windows PE.
In particular, you can create orrestore disk images in the Service Center Hotspot-Text. The
Service Center uses the Symantec Ghost software to do this.
Most of the functions of the Service Center can be accessed from the main menu.
5.2

Starting the Service Center

To start the Service Center, proceed in one of the following ways:
● To call up the Service Center on the SSD while the PCU is booting, press F12 during
● To call up the emergency boot system on a USB flash drive while the PCU is booting, set
● To switch to the Service Center while the Service Desktop (Windows 7) is active, click the
PCU Base Software (IM10)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
booting to show the boot selection.
the service switch to E or press F12 during booting to show the boot selection.
"ServiceCenter Backup-Restore" icon on the Desktop.
5
57