Siemens SINUMERIK 840D sl Commissioning Manual page 88

Machine and setting data
7.9 Managing data
The following option fields are available in the "Transfer Machine Data" window:
● Transfer data within the controller
Only those controller objects are listed that are currently available in the controller.
● Save data to a file
Additional files with the extensions .acx and .log are created for the SINAMICS
parameters:
– Files with the extension .acx contain the parameter descriptions for the selected drive
– The log file may also contain the warnings and errors that occurred during the
● Load data from a file
Note
An NCK and drive reset is only triggered automatically for drive objects after loading. A
reset must be triggered manually for all other controller objects.
● Compare data
Several files (.tea) and/or controller objects (axis, channel, servo, infeed, etc. ) can be
compared at the same time. An online comparison of constantly changing data is not
possible because the values are saved temporarily at the time of the comparison.
Up to eight elements can be taken into the list of the data to be compared.
Procedure
82
object.
conversion from .acx to .tea.
1. Select the "Start-up" operating area.
2. Press the "Mach. data" softkey.
The "Manage data" softkey is available in each machine data area,
except in "User views".
- OR -
Press the "System data" softkey and select the HMI data/Data
backups/IB data directory.
3. Press the "Manage data" softkey.
The "Transfer Machine Data" window opens.
4. Activate the required option filed and press "OK".
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
SINUMERIK Operate (IM9)