Siemens SINUMERIK 840D sl Commissioning Manual page 55

Restrictions:
● In the event of changes of distributed programs on the local drive using the Editor, it
● The display of the active block, the marking of the block search as well as the read-only
● In the Editor, programs are always opened in the context of the currently connected NCU.
● In the current block display in the "Machine" operating area, you can display only the
● The simulation of job lists via several machines is not possible.
● If
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
should be noted that only the channel states are monitored on the NCU currently
connected. If the program is still interrupted or active on another NCU, it cannot be
correctly distributed after the change.
handling of the program opened in the Editor are executed only for the active programs of
the currently connected NCU.
This can lead to a faulty step recognition with distributed programs.
active/distributed programs of the currently connected NCU.
distributeJoblist=true
subprograms can no longer be selected via the "Program Manager" operating area.
5.7 Distribution via job lists in the case of 1:N
is configured in the systemconfiguration.ini file, then part or
Channel menu
49