Siemens SINUMERIK 840D sl Commissioning Manual page 73

Precondition
To create program lists, you require the following authorization:
● "Program manager" operating area: Access level 3 (password: User) or
● "Start-up" operating area: Access level 1 (password: Manufacturer).
Program lists
You can create a program list by combining desired programs from the NC data, e.g.
workpieces, part programs and subprograms. These programs can then be selected by the
PLC for execution.
Program lists
plc_proglist_user.ppl
plc_proglist_manufacturer.ppl
Procedure
SINUMERIK Operate (IM9)
Commissioning Manual, 03/2013, 6FC5397-1DP40-3BA1
Directory
/user/sinumerik/hmi/plc/programlist
/oem/sinumerik/hmi/plc/programlist
1. Select the "Start-up" operating area if you have the authorization for
access level 1 (password: Manufacturer).
- OR -
Select the "Program manager" operating area if you have the
authorization for access level 3 (password: User).
2. Press the menu forward key and the "Prog. list" softkey.
The "Program List" window opens.
3. Press the "Manufacturer" softkey if you want to create a program list
that can be used for all machines of a certain series.
4. Place the cursor in the desired line (program number).
5. Press the "Select program" softkey.
The "Programs" window opens. The data tree of the NC memory with
the directories "Workpieces", "Part programs" and "Subprograms" is
displayed.
General settings
6.11 Program selection
67