Installation Of Additional Mechanical Stop On Axis - ABB IRB 1660 Product Manual

2.4.3 Installation of additional mechanical stop on axis 2

General
This section details how to install an additional mechanical stop on axis 2 in order
to restrict the working range of the axis.
Restrictions in working range
The working range of axis 2 can be restricted by fitting an additional mechanical
stop at the frame. The working range can only be restricted backwards, as shown
in the figures below. Notice the different working ranges for the different models!
xx0400001289
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
2.4.3 Installation of additional mechanical stop on axis 2
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
Continues on next page
105