ABB IRB 1660 Product Manual page 357

Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new, if needed.
Spare part
Protection cover and plug set
Protective plug on turning disc
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
5.4.3 Installation locations for the calibration tools
Article number
3HAC059487-001
3HAC057676-001
(IRB 1660ID)
3HAC061134-001
(IRB 1600)
© Copyright 2006-2018 ABB. All rights reserved.
5 Calibration
Continued
Note
Contains replacement calibration
pin covers and protective plugs
for the bushing.
Replace if damaged or missing.
357