Replacing The Push Button Unit; Location Of Push Button Unit; Push Button Unit On Serial Measurement Unit - ABB IRB 1660 Product Manual

4.5.3 Replacing the push button unit

Location of push button unit

The push button unit for brake release is located inside the base of the robot.
A more detailed view of the component and its location is shown in the spare part
view, see Spare parts - Base, exploded view..
xx0500001390
A

Push button unit on serial measurement unit

The push button unit is attached to the serial measurement unit as shown in the
figure.
xx0500001394
A
B
C
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
Base cover, including gasket. Push button unit is located beneath the cover.
Push button unit
Hexagon nuts (2 pcs)
Hexagon nuts, SMB unit (4 pcs). Only the outer ones are used.
© Copyright 2006-2018 ABB. All rights reserved.
4.5.3 Replacing the push button unit
Continues on next page
4 Repair
251