Table of Contents
Advertisement
5 Calibration
5.4.3 Installation locations for the calibration tools
5.4.3 Installation locations for the calibration tools
Location of fixed calibration items
This section shows how the robot is equipped with items for installation of
calibration tools for Axis Calibration (fixed calibration pins and/or bushings).
Installed calibration tools are not shown.
A fixed calibration pin and a bushing for the movable calibration tool are located
on each axis as follows.
If there is not enough space on an axis to install a fixed calibration pin, the axis is
equipped with two bushings instead, for installation of two calibration tools when
calibration is carried out. This is shown in the figure.
IRB 1600
xx1700000113
Continues on next page
354
© Copyright 2006-2018 ABB. All rights reserved.
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
Hide quick links:
Advertisement
Table of Contents
