ABB IRB 1660 Product Manual page 307

19
20
Refitting motor axis 5
Use this procedure to refit motor axis 5.
1
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
Action
Secure the upper arm tube with motor axis
5 pointing upwards.
This is to avoid draining the oil when motor
axis 5 is removed.
Remove motor axis 5 by unscrewing its at-
tachment screws.
Action
Place motor axis 5 in the upper arm tube.
© Copyright 2006-2018 ABB. All rights reserved.
4.6.9 Replacement of motor, axis 5, IRB 1660ID
Information
xx1500001263
• A: Cable harness to motor axis 6
xx1500001264
• A: Upper arm tube
• B: Motor axis 5
• C: Cable harness to motor axis 6
Information
4 Repair
Continued
Continues on next page
307