ABB IRB 1660 Product Manual page 208

4 Repair
4.4.5 Replacing the wrist unit, IRB 1600ID
Continued
Removing the wrist unit
Use this procedure to remove the complete wrist unit.
1
2
3
4
5
6
Continues on next page
208
Action
Decide which calibration routine to use, and
take actions accordingly prior to beginning
the repair procedure.
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot work-
ing area.
Remove all extra equipment fitted on upper
arm and wrist.
The plug (A) in figure covering the screw (C).
Remove the plug using standard tools (B).
Remove the screw for looking of motor axis
5, (C) in figure Location of wrist unit on
page 206.
Remove the VK-Cover.
Gently pull the cables out through the hole
for the VK- cover in the armtube.
© Copyright 2006-2018 ABB. All rights reserved.
Note
Shown in Remove AW Gun on page 229
xx0700000092
A Plug
B Standard tool, Standard tools on
page 383
C Hexagon socket head screw
M5X16 (Short head)
xx0700000054
A VK-Cover
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W