Unpacking; Pre-Installation Procedure; Prerequisites For Installation Personnel; Checking The Pre-Requisites For Installation - ABB IRB 1660 Product Manual

Table of Contents

Advertisement

2 Installation and commissioning

2.2.1 Pre-installation procedure

2.2 Unpacking

2.2.1 Pre-installation procedure
Introduction
This section is intended for use when unpacking and installing the robot for the
first time. It also contains information useful during later re-installation of the robot.

Prerequisites for installation personnel

Installation personnel working with an ABB product must:

Checking the pre-requisites for installation

1
2
3
4
5
6
7
8
9
10
11
Continues on next page
50
be trained by ABB and have the required knowledge of mechanical and
electrical installation/maintenance/repair work
conform to all national and local codes.
Action
Make a visual inspection of the packaging and make sure that nothing is damaged.
Remove the packaging.
Check for any visible transport damage.
Note
Stop unpacking and contact ABB if transport damages are found.
Clean the unit with a lint-free cloth, if necessary.
Make sure that the lifting accessory used (if required) is suitable to handle the weight
of the robot as specified in:
If the robot is not installed directly, it must be stored as described in:
tions, robot on page 53
Make sure that the expected operating environment of the robot conforms to the
specifications as described in:
Before taking the robot to its installation site, make sure that the site conforms to:
Loads on foundation, robot on page 51
Protection classes, robot on page 54
Requirements, foundation on page 52
Before moving the robot, please observe the stability of the robot:
bility on page 61
When these prerequisites are met, the robot can be taken to its installation site as
described in section:
On-site installation on page 63
Install required equipment, if any.
Installation of signal lamp for 1600 (option) on page 92
© Copyright 2006-2018 ABB. All rights reserved.
Weight, robot on page 51
Operating conditions, robot on page 53
Product manual - IRB 1600/1660
Storage condi-
Risk of tipping/sta-
3HAC026660-001 Revision: W

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Irb 1600

Table of Contents