Installation Of Signal Lamp For 1600Id/1660Id (Option) - ABB IRB 1660 Product Manual

2.3.9 Installation of signal lamp for 1600ID/1660ID (option)

General
A signal lamp with an yellow fixed light can be mounted on the robot, as a safety
device. The signal lamp is reqired on an UL/UR approved robot.
The lamp is active in MOTORS ON mode.
Location of signal lamp
The signal lamp is fitted to the upper arm housing of the robot, as shown in the
figure below
xx0700000100
A
B
Required equipment
Equipment
Signal lamp
Drill
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
2.3.9 Installation of signal lamp for 1600ID/1660ID (option)
Note
Do not use the signal lamp option in a Clean Room environment.
Signal lamp
Cover, upper arm housing
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
Art. no.
3HAC9258-1
-
Note
Diameter 22.5 mm
Continues on next page
95