Service Work On Gearboxes, Axes 3, 4, 5 And 6; Gearboxes, Replacement - ABB IRB 1660 Product Manual

4.7.2 Service work on gearboxes, axes 3, 4, 5 and 6

Gearboxes, replacement

The gearboxes of axes 3, 4, 5 and 6 are intended to run without requiring any
repairs or maintenance work. This implies that they must under no circumstances
be opened or serviced.
If the gearboxes require replacement:
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
• axes 3 and 4: the complete upper arm is to be replaced. This procedure is
detailed in section Replacing the complete upper arm, IRB 1600 on page
• axes 5 and 6: the complete wrist unit is to be replaced. This procedure is
detailed in section Replacing the wrist unit, IRB 1600 on page
© Copyright 2006-2018 ABB. All rights reserved.
4.7.2 Service work on gearboxes, axes 3, 4, 5 and 6
4 Repair
183.
201.
335