Inspecting The Mechanical Stop Pin, Axis 1 - ABB IRB 2600ID Product Manual

3 Maintenance

3.3.8 Inspecting the mechanical stop pin, axis 1

3.3.8 Inspecting the mechanical stop pin, axis 1
Location of mechanical stop pin, axis 1
The mechanical stop pin is located on the frame as shown in the figure.
xx0800000298
A
B
Required equipment
Equipment
Mechanical stop pin axis 1
Standard toolkit
Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Continues on next page
140
A
Fixed stop
Mechanical stop pin, axis 1
© Copyright 2009-2023 ABB. All rights reserved.
B
Article number
See Spare part lists on
page 457.
Note
Content is defined in section
Standard tools on page 452.
These procedures include
references to the tools re-
quired.
Product manual - IRB 2600
3HAC035504-001 Revision: AD