Replacement Activities; Type Of Lubrication In Gearboxes; Type And Amount Of Oil In Gearboxes; Location Of Gearboxes - ABB IRB 1660 Product Manual

3.4 Replacement activities

3.4.1 Type of lubrication in gearboxes

Introduction
This section describes where to find information about the type of lubrication,
article number and the amount of lubrication in the specific gearbox. It also
describes the equipment needed when working with lubrication.

Type and amount of oil in gearboxes

Information about the type of lubrication, article number as well as the amount in
the specific gearbox can be found in Technical reference manual - Lubrication in
gearboxes available for registered users on myABB Business Portal,
rtal.abb.com.
Before starting any inspection, maintenance, or changing activities of lubrication,
always contact the local ABB Service organization for more information.
For ABB personnel: Always check ABB Library for the latest revision of the manual
Technical reference manual - Lubrication in gearboxes, in order to always get the
latest information of updates about lubrication in gearboxes. A new revision will
be published on ABB Library immediately after updates.

Location of gearboxes

The figure shows the location of the gearboxes.
Equipment
Equipment
Oil dispenser
Nipple for quick connect fitting, with o-ring
Expansion container, gearbox axis 1
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
© Copyright 2006-2018 ABB. All rights reserved.
3.4.1 Type of lubrication in gearboxes
Note
Includes pump with outlet pipe.
Use the suggested dispenser or a similar one:
• Orion OriCan article number 22590
(pneumatic)
Used when the robot is fitted in a suspended
position.
3 Maintenance
www.mypo-
137