Installation Of Additional Mechanical Stops On Axis - ABB IRB 1660 Product Manual

2.4.4 Installation of additional mechanical stops on axis 3

General
This section details how to install an additional mechanical stop on axis 3 in order
to restrict the working range of the axis.
Restrictions in working range
The working range of axis 3 can be restricted into two different working areas, as
shown in the two figures below. Notice the differences between the different models.
xx0400001283
-
A
B
Product manual - IRB 1600/1660
3HAC026660-001 Revision: W
2.4.4 Installation of additional mechanical stops on axis 3
Robot models IRB 1600 - x/1.2
Working range A
Working range B
© Copyright 2006-2018 ABB. All rights reserved.
2 Installation and commissioning
Continues on next page
109