Toyota Camry Manual page 2136

5th
4th
2nd 6th
1st
1.27 mm
Hexagon
Wrench
1.27 mm
Hexagon
Wrench
ENGINE MECHANICAL (1MZ–FE)
7.
3rd
NOTICE:
The engine should be cold.
(a)
NOTICE:
Only wipe the pulleys; do not use any cleansing agent.
(b)
(c)
A02338
(d)
(e)
8.
(a)
(b)
(c)
A05064
(d)
A05065
9.
(a)
(b)
(c)
A05066
– TIMING BELT
INSTALL TIMING BELT
Remove any oil or water on the pulleys, and keep them
clean.
Face the front mark on the timing belt forward.
Align the installation mark on the timing belt with the tim-
ing mark of the crankshaft timing pulley.
Align the installation marks on the timing belt with the tim-
ing marks of the camshaft timing pulleys.
Install the timing belt in this order:
1st: Crankshaft timing pulley
2nd: Water pump pulley
3rd: LH camshaft timing pulley
4th: No.2 idler pulley
5th: RH camshaft timing pulley
6th: No.1 idler pulley
SET TIMING BELT TENSIONER
Using a press, slowly press in the push rod using 981 –
9,807 N (100 – 1,000 kgf, 200 – 2,205 lbf) of pressure.
Align the holes of the push rod and housing, pass a 1.27
mm hexagon wrench through the holes to keep the set-
ting position of the push rod.
Release the press.
Install the dust boot to the tensioner.
INSTALL TIMING BELT TENSIONER
Temporarily install the tensioner with the 2 bolts.
Alternately tighten the 2 bolts.
Torque: 27 N·m (280 kgf·cm, 20 ft·lbf)
Remove the 1.27 mm hexagon wrench from the tension-
er.
Author :
EM–23
Date :
1309