Toyota Camry Manual page 1669

DI–642
3 Check airbag sensor assembly.
Spiral
Cable
D Squib
ACC
or
DLC1
Tc
E1
H01002
AB0118
AB0119
R13006
FI1390
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
CHECK:
Assembly
(a)
(b)
ON
(c)
(d)
DTC B0100/13
(e)
OK:
HINT:
Codes other than code B0100/13 may be output at this time, but
H07478
they are not relevant to this check.
NG
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0100/13 is not output.
Replace airbag sensor assembly.
Author : Date :
877