Toyota Camry Manual page 1690

4 Check P squib.
P Squib
Airbag
Sensor
Assembly
ACC ON
or
DLC1
Tc
E1
H01024
AB0118 AB0119
R13006 H01078
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
(b)
(c)
(d)
CHECK:
(a)
(b)
(c)
DTC B0106/54
(d)
(e)
OK:
H01205
HINT:
Codes other than code B0106/54 may be output at this time, but
they are not relevant to this check.
NG
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to LOCK.
Disconnect negative (–) terminal cable from the battery,
and wait at least for 90 seconds.
Connect the front passenger airbag assembly connector.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0106/54 is not output.
Replace front passenger airbag assembly.
Author :
DI–663
Date :
898