Toyota Camry Manual page 1703

DI–676
3 Check airbag sensor assembly.
Squib (RH)
ACC
or
DLC1
H08250
W03860
AB0118 AB0119
R13006 H01069
OK
DIAGNOSTICS
PREPARATION:
(a)
(b)
Airbag
Sensor
Assembly
CHECK:
(a)
(b)
ON
(c)
(d)
DTC B0110/43
(e)
OK:
HINT:
Codes other than code B0110/43 may be output at this time, but
H08249
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0110/43 is not output.
NG Replace airbag sensor assembly.
Author : Date :
911