Toyota Camry Manual page 2335

MX–12
Remove
SST
SST
MANUAL TRANSAXLE (S51)
Q02530
Install
Q05696
Q05200
SST
Z00455
Q02695
– MANUAL TRANSAXLE ASSEMBLY
9. REMOVE OUTPUT SHAFT LOCK NUT
(a) Unstake the nut.
(b) Engage the gear double meshing.
(c) Rotate the lock nut clockwise and remove it.
Torque: 123 N·m (1,250 kgf·cm, 90 ft·lbf)
HINT:
The lock nut has LH threads.
(d) Disengage the gear double meshing.
10. REMOVE NO.3 HUB SLEEVE AND NO.3 SHIFT FORK
(a) Remove the No.3 shift fork set bolt.
Torque: 18 N·m (185 kgf·cm, 13 ft·lbf)
(b) Remove the No.3 hub sleeve and No.3 shift fork.
11. REMOVE 5TH DRIVEN GEAR
Using SST, remove the 5th driven gear.
SST 09950–40011
HINT:
At the time of installation, please refer to the following item.
Using SST, install the 5th driven gear.
SST 09309–12020
12. MEASURE 5TH GEAR THRUST CLEARANCE
Using a dial indicator, measure the thrust clearance.
Standard clearance:
0.20 – 0.40 mm (0.0079 – 0.0157 in.)
Maximum clearance:
0.45 mm (0.0177 in.)
Author : Date :
1862