Toyota Camry Manual page 1841

DI–814
INSPECTION PROCEDURE
1 Check voltage between terminals LSWD, LSWP and LSWR of wireless door lock
ECU connector and body ground.
LSWR(+)
I00273
N14691
NG
Check and repair harness and connector between wireless door lock ECU and door unlock
detection switch.
DIAGNOSTICS
PREPARATION:
Remove the wireless door lock ECU from No.1 instrument pan-
el brace.
LSWD(+)
CHECK:
Measure voltage between each of terminals LSWD, LSWP and
LSWR of wireless door lock ECU connector and body ground,
when the respective door lock knobs involved are pushed to the
lock side.
LSWP(+)
OK:
I00243
Voltage 10 – 14 V
OK
– WIRELESS DOOR LOCK CONTROL SYSTEM
Proceed to next circuit inspection shown on
problem symptoms table (See page DI–809).
Author : Date :
1049