Toyota Camry Manual page 2596

SF–4
California A/T
Delivery Pipe
Insulator
O–Ring
Except California A/T
Delivery Pipe
Insulator
O–Ring
Vinyl Bag
SFI (1MZ–FE)
(e) Install the injector to the delivery pipe and intake manifold,
as shown in the illustration.
O–Ring
Before installing the injector, must apply spindle oil or gas-
oline on the place where a delivery pipe or an intake man-
ifold touches an O–ring of the injector.
Grommet
Spacer
O–Ring
Grommet
Spacer
B00630
(f) Observe these precautions when disconnecting the fuel
tube connector (quick type).
(1)
(2)
(3)
(4)
S04583
(5)
S05040
– SFI SYSTEM
Check if there is any dirt like mud on the pipe and
around the connector before disconnecting them
and clean the dirt away.
Be sure to disconnect with hands.
When the connector and the pipe are stuck, pinch
the retainer between the hands, push and pull the
connector to free to disconnect and pull it out. Do
not use any tool at this time.
Inspect if there is any dirt or the likes on the seal sur-
face of the disconnected pipe and clean it away.
Prevent the disconnected pipe and connector from
damaging and mixing foreign objects by covering
them with a vinyl bag.
Author : Date :
1503