Toyota Camry Manual page 1710

3 Check airbag sensor assembly.
Squib (RH)
SFR– SFR+
DLC1
H02273
E1
Tc
W03860
AB0118 AB0119
H01070
R13006
OK
DIAGNOSTICS
PREPARATION:
(a)
Airbag
(b)
Sensor
Assembly
(c)
CHECK:
ACC ON
(a)
or
(b)
DTC B0111/44
(c)
(d)
(e)
H03249
OK:
HINT:
Codes other than code B0111/44 may be output at this time, but
they are not relevant to this check.
– SUPPLEMENTAL RESTRAINT SYSTEM
Connect the connector to the airbag sensor assembly.
Using a service wire, connect SFR+ and SFR– of the con-
nector (on the side airbag assembly side) between the
side airbag assembly (RH) and the airbag sensor assem-
bly.
Connect negative (–) terminal cable to the battery, and
wait at least for 2 seconds.
Turn ignition switch to ACC or ON and wait at least for 20
seconds.
Clear DTC stored in memory.
(See page DI–626)
Turn ignition switch to LOCK, and wait at least for 20 se-
conds.
Turn ignition switch to ACC or ON, and wait at least for 20
seconds.
Check DTC.
(See page DI–626)
DTC B0111/44 is not output.
NG Replace airbag sensor assembly.
Author :
DI–683
Date :
918