Toyota Camry Manual page 1851

DI–824
INSPECTION PROCEDURE
1 Check voltage between terminal PANI of theft deterrent ECU connector and body
ground.
NG
2 Check the panic signal (Theft deterrent ECU side)
Output signal
Push the panic switch
4 – 6 V
Below 1 V
300m sec
NG
DIAGNOSTICS
CHECK:
PANI Measure voltage between terminal PANI of theft deterrent ECU
connector and body ground.
OK:
I00310
OK
CHECK:
PANI Check the signal of the terminal PANI when pushing the PANIC
switch of the transmitter.
HINT:
Check the signal using the oscilloscope or oscilloscope function
of TOYOTA hand–held tester.
OK:
I00309
OK
– WIRELESS DOOR LOCK CONTROL SYSTEM
Voltage: 4 – 6 V
Exchange theft deterrent ECU.
Output the signal as shown in the illustration.
Exchange theft deterrent ECU.
Author : Date :
1059