Toyota Camry Manual page 2530

Hide thumbs Also See for Camry:

Table of Contents

Except California

Install the injector to the delivery pipe and cylinder head,

as shown in the illustration.

Before installing the injector, must apply spindle oil or gas-

oline on the place where a delivery pipe or an intake man-

ifold touches an O–ring of the injector.

Observe these precautions when disconnecting the fuel

tube connector (quick type):

Check if there is any dirt like mud on the pipe and

around the connector before disconnecting them

and clean the dirt away.

Be sure to disconnect with hands.

When the connector and the pipe are stuck, pinch

the retainer between the hands, push and pull the

connector to free to disconnect and pull it out. Do

not use any tool at this time.

Inspect if there is any dirt or the likes on the seal sur-

face of the disconnected pipe and clean it away.

Prevent the disconnected pipe and connector from

damaging and mixing foreign objects by covering

them with a vinyl bag.

Observe these precautions when connecting the fuel

tube connector (quick type):

Do not reuse the retainer removed from the pipe.

Must use hands without using tools when to remove

the retainer from the pipe.

Check if there is any damage or foreign objects on

the connected part of the pipe.

Show Quick Links

Table of Contents