Toyota Camry Manual page 1705

DI–678
5 Check sub wire harness.
Sub Wire Harness
Squib (RH)
SFR–
(–) (+)
H02275
W03859
OK
6 Check harness between airbag sensor assembly and sub wire harness.
Sub Wire Harness
Squib (RH)
SFR–
(–) (+)
H02276
W03859
OK
For the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
DIAGNOSTICS
PREPARATION:
(a)
Airbag
Sensor
(b)
Assembly
CHECK:
For the connector (on the sub wire harness side) between the
side airbag assembly and the sub wire harness, measure the
SFR+
resistance between SFR+ and SFR–.
OK:
NG
H03247
PREPARATION:
Release the airbag activation prevention mechanism of the air-
Airbag
bag sensor assembly connector. (See page DI–626)
Sensor
CHECK:
Assembly
For the connector (on the sub wire harness side) between the
airbag sensor assembly and sub wire harness, measure the re-
sistance between SFR+ and SFR–.
OK:
SFR+
NG
H03248
– SUPPLEMENTAL RESTRAINT SYSTEM
Disconnect sub wire harness connector on the airbag
sensor assembly side.
Release the airbag activation prevention mechanism of
the sub wire harness connector on the airbag sensor as-
sembly side. (See page DI–626)
Resistance: 1 MΩ or Higher
Repair or replace sub wire harness.
Resistance: 1 MΩ or Higher
Repair or replace harness or connector be-
tween airbag sensor assembly and sub wire
harness.
Author : Date :
913