Toyota Camry Manual page 1802

INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check wire harness (to B+).
Front Airbag
Sensor (RH)
ON
(+)
(–)
H03355
AB0119
H03363
OK
3 Check wire harness (to ground).
Front Airbag
Sensor (RH)
(+)
(–)
H03353
H03361
OK
DIAGNOSTICS
CHECK:
(a)
Airbag
(b)
Sensor
Assembly
Airbag Sensor
OK:
Assembly
SR+
SR–
H03445
CHECK:
For the connector (on the airbag sensor assembly side) be-
Airbag
tween the front airbag sensor (RH) and the airbag sensor as-
Sensor
sembly, measure the resistance between body ground and
Assembly
each of SR+ and SR–.
OK:
Airbag Sensor
Assembly
SR+
SR–
H03443
– SUPPLEMENTAL RESTRAINT SYSTEM
Turn ignition switch to ON.
For the connector (on the airbag sensor assembly side)
between the front airbag sensor (RH) and the airbag sen-
sor assembly, measure the voltage between body ground
and each of SR+ and SR–.
Voltage: Below 1 V
NG Go to step 8.
Resistance: 1 MΩ or Higher
NG Go to step 9.
Author :
DI–775
Date :
1010