Toyota Camry Manual page 1691

DI–664
DTC B0107/51
CIRCUIT DESCRIPTION
The P squib circuit consists of the airbag sensor assembly and front passenger airbag assembly.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS–2.
DTC B0107/51 is recorded when ground short is detected in the P squib circuit.
DTC No.
D Short circuit in P squib wire harness (to ground)
D P squib malfunction
B0107/51
D Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI–657.
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check P squib circuit.
P Squib
(–)
H01227
H02145
OK
DIAGNOSTICS
Short in P Squib Circuit (to Ground)
DTC Detecting Condition
CHECK:
For the connector (on the front passenger airbag assembly
Airbag
side) between the front passenger airbag assembly and the air-
Sensor
bag sensor assembly, measure the resistance between P+ and
Assembly
body ground.
OK:
P+
(+)
H02254
– SUPPLEMENTAL RESTRAINT SYSTEM
D Front passenger airbag assembly (P squib)
D Airbag sensor assembly
D Wire harness
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector be-
tween front passenger airbag assembly and air-
bag sensor assembly.
Author :
Trouble Area
Date :
DI1B8–11
899