Toyota Camry Manual page 1685

DI–658
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI–787)
2 Check P squib circuit.
P Squib
P–
(–)
R14286
H02142
OK
DIAGNOSTICS
PREPARATION:
Release airbag activation prevention mechanism of the con-
nector (on the airbag sensor assembly side) between the front
Airbag
passenger airbag assembly and the airbag sensor assembly.
Sensor
Assembly
(See page DI–626)
CHECK:
For the connector (on the front passenger airbag assembly
side) between the front passenger airbag assembly and the air-
bag sensor assembly, measure the resistance between P+ and
P–.
P+
OK:
(+)
H02251
– SUPPLEMENTAL RESTRAINT SYSTEM
Resistance: 1 MΩ or Higher
NG Repair or replace harness or connector be-
tween front passenger airbag assembly and air-
bag sensor assembly.
Author : Date :
893