Toyota Camry Manual page 1926

INSPECTION PROCEDURE
1 Check operation of stop light.
CHECK:
Check that stop light comes ON when brake pedal is depressed, and turns OFF when brake pedal is re-
leased.
OK
2 Input signal check.
Indicator Light
Input Signal
Blinking Pattern
OFF
Stop Light
Light
switch ON
NG
DIAGNOSTICS
SW OFF
SW ON
ON
– CRUISE CONTROL SYSTEM
NG Check stop light system (See page BE–2).
CHECK:
(a) See input signal check on DI–870.
(b) Check the indicator light when the brake pedal is de-
pressed.
OK:
The indicator light goes OFF when the brake pedal is
depressed.
OK Proceed to next circuit inspection shown on
problem symptoms table (See page DI–879).
Author :
DI–899
Date :
1134