Toyota Camry Manual page 2132

NO!
P20042
ENGINE MECHANICAL (1MZ–FE)
INSPECTION
1.
NOTICE:
If there are any defects, as shown in the illustrations, check
EM3336
these points:
(a)
(b)
(c)
(d)
(e)
If necessary, replace the timing belt.
2.
(a)
If leakage is found, replace the idler pulley.
A02309
(b)
If necessary, replace the idler pulley.
P12604
– TIMING BELT
INSPECT TIMING BELT
Do not bend, twist or turn the timing belt inside out.
Do not allow the timing belt to come into contact with
oil, water or steam.
Do not utilize timing belt tension when installing or re-
moving the mount bolt of the camshaft timing pulley.
Premature parting
Check for proper installation.
Check the timing cover gasket for damage and
proper installation.
If the belt teeth are cracked or damaged, check to see if
either camshaft is locked.
If there is noticeable wear or cracks on the belt face,
check to see if there are nicks on the side of the idler
pulley lock and water pump.
If there is wear or damage on only one side of the belt,
check the belt guide and the alignment of each pulley.
If there is noticeable wear on the belt teeth, check timing
cover for damage and check gasket has been installed
correctly and for foreign material on the pulley teeth.
INSPECT IDLER PULLEYS
Visually check the seal portion of the idler pulley for oil
leakage.
Check that the idler pulley turns smoothly.
Author :
EM–19
EM04P–03
Date :
1305